倾斜入射下的单截面平面度绝对检验

针对大尺寸光学平面的直线度的纳米级测量精度需求，提出了倾斜入射下单截面平面度绝对检验方法，实现了对超过相移干涉仪口径的长平晶绝对检验。利用棱镜转向实现倾斜入射角度的精密预标定，棱镜标定角度的精度高于圆光栅和图像分析等方法，可提高测量不确定度到0.0042 μm。对比了常规三面互检绝对检验结果与本方法的差异，在相同尺寸下，直线度误差仅为1.2 nm。在确认标定反射镜位置后，整个倾斜入射的干涉图调整过程将被完全集中到待测长平晶的工作面上，不需要再对反射平晶进行操作。调整长平晶时各个维度的操作互不干涉，可快速简便地得到测量结果。     

A novel fabrication procedure for producing high strength hydroxyapatite ceramic scaffolds with high porosity

Hydroxyapatite (HA) scaffolds were fabricated using the space holder method with a pressureless sintering process in a systematically developed manner at different fabrication stages to increase the strength of the scaffold at high porosity. Polyvinyl alcohol (PVA) and Polymethyl methacrylate (PMMA) were used as binders and space holder agents, respectively. The physical properties of the HA scaffolds were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), linear shrinkage test, and porosity measurements. The mechanical properties of the HA scaffolds were analyzed using compressive strength measurements. The results revealed that the HA scaffold met the expected quality requirements with a compressive strength of 2.2 MPa at a porosity of 65.6% with pore sizes distributed in the range of 126–385 μm. The shrinkage of the scaffold diameter occurred by 20.27%, this diameter shrinkage predominantly to the shrinkage of the HA scaffold caused by sintering. Besides, suspect that a higher PMMA concentration causes pore size shrinkage upon sintering. The formation of pore interconnections was evidenced by SEM observations and the ‘translucent light method’ developed in this study. The results of the scaffold phase test using XRD showed that the final scaffold consisted only of the HA phase, as the PVA and PMMA phases burned out during the sintering process.     

Labeling and Characterization of Phenol-Containing Glycopeptides Using Chemoselective Probes with Isotope Tags

Secondary metabolites are structurally diverse natural products (NPs) and have been widely used for medical applications. Developing new tools to enrich NPs can be a promising solution to isolate novel NPs from the native and complex samples. Here, we developed native and deuterated chemoselective labeling probes to target phenol-containing glycopeptides by the ene-type labeling used in proteomic research. The clickable azido-linker was included for further biotin functionalization to facilitate the enrichment of labeled substrates. Afterward, our chemoselective method, in conjunction with LC-MS and MSn analysis, was demonstrated in bacterial cultures. A vancomycin-related phenol-containing glycopeptide was labeled and characterized by our labeling strategy, showing its potential in glycopeptide discovery in complex environments.     

UV curing-assisted 3D plotting of ceramic feedstock containing thermo-regulated phase-separable,photocurable vehicle for dual-scale porosity structure

We propose a novel approach for manufacturing dual-scale porosity alumina structures by UV curing-assisted 3D plotting of a specially formulated alumina feedstock using a thermo-regulated phase separable, photocurable camphene/triethylene glycol dimethacrylate (TEGDMA) vehicle. In particular, 3D plotting process was conducted at - 5 °C, and thus an alumina suspension prepared using liquid camphene/TEGDMA at room temperature could undergo phase separation, resulting in camphene crystals surrounded by walls comprised of liquid photopolymer enclosing alumina particles. To enhance the shape retention ability of extruded filaments, polystyrene (PS) polymer was used as the tackifier. The phase-separated feedrod could be extruded favorably through a nozzle and rapidly photopolymerized by UV light during the 3D plotting process. Three-dimensionally interconnected macropores were tightly constructed, which were separated by microporous alumina filaments, where micropores were created by the removal of camphene crystals via freeze-dying. The macroporosity of porous alumina ceramics was controlled by adjusting the distance between deposited filaments, while their microporosity was kept constant, leading to tightly tailored overall porosity and mechanical properties.     

储能水管-冲击式水轮机发电系统设计及发电效益分析

为充分利用高层建筑物内部的水能包括生活污水及高层建筑物顶楼雨水,可将其转化为电能。由此设计的储能水管-冲击式水轮机装置即通过冲击式水轮机和发电机将高层建筑物内部储存的生活污水及雨水的势能转变为可供使用的电能,并通过建立单户用水模拟模型,设置储能水管对30、100层建筑进行发电模拟。模拟结果表明,储能水管-冲击式水轮机发电具有很好的发电效益和节能减排社会效益,获得了日发电过程中冲击式水轮机的水头变换和启停特性,为该系统中冲击式水轮机的个性设计提供了依据。     

二连盆地乌兰花凹陷特低渗安山岩储层的有效性评价

针对二连盆地乌兰花凹陷安山岩储层的特性认识不清、有效储层划分不准确的问题，利用岩心薄片、黏土矿物分析、物性测试以及核磁共振实验等手段开展了岩石储集空间特征、岩石蚀变程度、测井响应特征分析。在此基础上，重点开展了基于核磁共振实验的安山岩储层有效孔隙度计算模型研究，开发了相适应的测井解释评价模块，并结合常规测井和试油结果建立了安山岩储层的分类标准。结果表明：安山岩储集空间具有发育"微孔"、"杏仁孔"双孔隙的特征，且以微孔为主；根据不同蚀变程度所建立的安山岩有效孔隙度计算模型具有很高的精度，平均绝对误差为0.16%，平均相对误差为19.40%；新测井解释储层分类标准在实际应用中与试油结论具有很好的一致性，有利于乌兰花凹陷安山岩有效储层的精确划分，并为该地区开发方案的设计及可采储量评价提供技术支持。     

Characterisation of the microplasma spraying of biocompatible coating of titanium

This paper presents new results of studying the influence of parameters of microplasma spraying (MPS) of Ti wire on the structure and properties of Ti coatings. Based on the design of the experiment and the results of the SEM study, certain spraying modes were chosen to form the desired composition and structure of the Ti coating.  The dense sublayer (up to 300 µm thick) provides good adhesion to the substrate, and a porous top layer can accelerate the coated implant ingrowth with the bone.  This technology is developed for the manufacture of coated endoprosthesis implants.     

Preparation of YSZ porous ceramics with precise porosity control

Conventional preparation of porous ceramics often hard to accurately control the porosity of the samples. In this paper, by improving the foaming method, the foaming process is placed in the limited space of the ball mill tank, and YSZ porous ceramics with different porosity are obtained by changing the amount of slurry. Initial results showed that the porosity of the sample varies linearly with the increasing of addition of slurry. From the microscopic morphology, it can be seen that the increase in slurry content will reduce the number of pore with little changed size, which lead to the decrease in porosity. Therefore, with simple calculation YSZ porous ceramics with 85%, 80%, 75%, 70%, and 65% porosity can be obtained using the method of foaming in limited space by ball milling.     

锅炉二次风道流动特性的模拟优化

以武汉武锅能源工程有限公司设计的二次风道为对象,运用数值模拟的方法考查了改造前后二次风道各出口空气的速度分布和质量流量分配情况。结果表明,通过布置弧形挡板,风道出口速度的均匀性显著提升,最大变异系数Cv由29%下降到9%,而且还避免了因风速不均引起的烧边现象。此外,改进后风道各出口空气的流量分配非常接近理想工况,与理想工况的偏差从9.9%缩小到2.1%。